Serving sizing in the cloud can be tricky. Unless you are about to do some massive high-performance computing project, super-sizing your cloud virtual machines/instances is probably not what you are thinking about when you log in to your favorite cloud service provider. But from looking at customer data within our system, it certainly does look like a lot of folks are walking up to their neighborhood cloud provider and saying exactly that: Super Size Me!
Like at a fast-food place, buying in the super size means paying extra costs…and when you are looking for ways to save money on cloud costs, whether for production or non-production resources, the first place to look is at idle and underutilized resources.
Within the ParkMyCloud SaaS platform, we have collected bazillions (scientific term) of samples of performance data for tens of thousands of virtual machines, across hundreds of customers, and the average of all “Average CPU” readings is an amazing (even to us) 4.9%. When you consider that many of our customer are already addressing underutilization by stopping or “parking” their instances when they are not being used, one can easily conclude that the server sizing is out of control and instances are tremendously overbuilt. In other words, they are much more powerful than they need to be…and thus much more expensive than they need to be. As cool as “super sizing” sounds, the real solution is in rightsizing, and ensuring the instance size and type are better tailored to the actual load.
Before we start talking about what is involved in rightsizing, let’s look at a few more statistics, just because the numbers are pretty cool. Looking at utilization data from about 88.9 million instance-hours on AWS – that’s 10,148 years – we find the following:
So, what is this telling us about server sizing? The percentiles alone tell us that more than 95% of our samples are operating at less than 50% Average CPU – which means if we cut the number of CPUs in half for most of our instances, we would probably still be able to carry our workload. The 95th percentile for Peak CPU is 58%, so if we cut all of those CPUs in half we would either have to be OK with a small degradation in performance, or maybe we select an instance to avoid exceeding 99% peak CPU (which happens around the 93rd percentile – still a pretty massive number).
Looking down at the 75th and 50th percentiles we see instances that could possibly benefit from multiple steps down! As shown in the next section, one step down can save you 50% of the cost for an instance. Two steps down can save you 75%!
Before making an actual server sizing change, this data would need to be further analyzed on an instance by instance basis – it may be that many of these instances have bursty behavior, where their CPUs are more highly utilized for short periods of time, and idle all the rest of the time. Such an instance would be better off being parked or stopped for most of the time, and only started up when needed. Or…depending on the duration and magnitude of the burst, might be better off moving to the AWS T instance family, which accumulates credits for bursts of CPU, and is less expensive than the M family, built for a more continuous performance duty cycle. Also – as discussed below – complete rightsizing would entail looking at some other utilization stats as well, like memory, network, etc.
On every cloud provider there is a clear progression of server sizing and prices within any given instance family. The next size up from where you are is usually twice the CPUs and twice the memory, and as might be expected, twice the price.
Here is a small sample of AWS prices in us-east-1 (N. Virginia) to show you what I mean:
Double the memory and/or double the CPU…and double the price.
It is important to note that there is more to instance utilization than just the CPU stats. There are a number of applications with low-CPU but high network, memory, disk utilization, or database IOPs, and so a complete set of stats are needed before making a rightsizing decision.
This can be where rightsizing across instance families makes sense.
On AWS, some of the most commonly used instance types are the T and M general purpose families. Many production applications start out on the M family, as it has a good balance of CPU and memory. Let’s look at the m5.4xlarge as a specific example, shown in the middle row below.
- If you find that such an instance was showing good utilization of its CPU, maybe with an Average CPU of 75% and Peak CPU of 95%, but the memory was extremely underutilized, maybe only consuming 20%, we may want to move to more of a compute-optimized instance family. From the table below, we can see we could move over to a c5.4xlarge, keeping the same number of CPUs, but cutting the RAM in half, saving about 11% of our costs.
- On the other hand, if you find the CPU was significantly underutilized, for example showing an Average CPU of 30% and Peak of 45%, but memory was 85% utilized, we may be better off on a memory-optimized instance family. From the table below, we can move to an r5.2xlarge instance cutting the vCPUs in half, and keeping the same amount of RAM, and saving about 34% of the costs.
Within AWS there are additional considerations on the network side. As shown here, available network performance follows the instance size and type. You may find yourself in a situation where memory and CPU are non-issues, but high network bandwidth is critical, and deliberately super-size an instance. Even in this case, though, you should think about whether there is a way to split your workload into multiple smaller instances (and thus multiple network streams) that are less expensive than a beastly machine selected solely on the basis of network performance.
You may also need to consider availability when determining your server sizing. For example, if you need to run in a high-availability mode using an autoscaling group you may be running two instances, either one of which can handle your full load, but both are only 50% active at any given time. As long as they are only 50% active that is fine – but you may want to consider if maybe two instances at half the size would be OK, and then address a surge in load by scaling-up the autoscaling group.
For full cost optimization for your virtual machines, you need to consider appropriate resource scheduling, server sizing, and sustained usage.
- Rightsize instances wherever possible. You can easily save 50% just by going down one size tier – and this applies to production resources as well as development and test systems!
- Modernize your instance types. This is similar to rightsizing, in that you are changing to the same instance type in a newer generation of the same family, where cloud provider efficiency improvements mean lower costs. For example, moving an application from an m3.xlarge to an m5.xlarge can save 28%!
- Park/stop instances when they are not in use. You can save 65% of the cost of a development or test virtual machine by just having it on 12 hours per day on weekdays!
- For systems that must be up continually, (and once you have settled on the correct size instance) consider purchasing reserved instances, which can save 54-75% off the regular cost. If you would like a review of your resource usage to see where you can best utilized reserved instances, please let us know.
Last week, ParkMyCloud released the ability to rightsize and modernize instances. This release helps you identify the virtual machine and database instances that are not fully utilized or on an older family, making smart recommendations for better server sizing and/or family selection for the level of utilization, and then letting you execute the rightsize action. We will also be adding a feature for scheduled rightsizing, allowing you to maintain instance continuity, but reducing its size during periods of lower utilization.